Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning and hacking by using the first aftermarket CAN-Immobiliser. With the additional option to link to a Ghost app and GPS tracking system that can notify you via phone in the event that your vehicle is damaged with or stolen.
The installation of an Ghost immobiliser is done by a certified technician. Having the right tools, insulation tape and heat shrink tubing is crucial.
Getting Started
Ghost immobilisers can be a great alternative to physical theft protection devices like wheel locks and car alarms. They protect your vehicle without the use of LED indicators or key fobs. Instead, they connect directly to the ECU's CAN network and will only start after entering a PIN sequence. This provides a more secure level of protection against key hacking, cloning, and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high level of agility and precision. It's like walking through the minefield. A single mistake could cause irreparable damage to the circuits of the electrical system of your vehicle. It is crucial to know the procedure for installing and prepare your vehicle correctly.
You'll need to take out interior panels from the vehicle to make room for the immobiliser. Once you have found the ideal place to hide it and you have it, use cable tie to fix it. Then, clean up the wiring by tying loose wires, and then using insulation tape or heat shrink tubing to cover exposed connections. This can help minimize the risk of short circuits that are not intended to be there as well as improving the aesthetics and decreasing the possibility of tampering with by thieves.
Find a reliable source of 12V power, as well as a grounding for the ghost immobiliser. Once you have located them test the power cables with a multimeter. Then, connect the CAN H and CAN L wires from the immobiliser to the identified power source and grounding point.
It is essential to double-check all the connections and check the immobiliser to check for signs of corrosion. You should also test the system to ensure it's working correctly by entering a PIN code and then starting the engine. This should be an ongoing part of your routine because it will allow you to detect any issues that might be intermittent early. Regular testing will also help to prolong the life of the device, and ensure it's running at its peak performance.
Preparing the Vehicle
Installing a Ghost immobiliser requires knowledge and tools. A wiring diagram of the vehicle is crucial to identify the proper wires and establishing precise connections, while a multimeter can be used to verify the electrical properties and ensure security. Insulation tape and cable tie can be used to secure the connections and shield them from being tampered with. A user's manual is available for the Ghost Immobiliser. It will give you specific instructions that are tailored to your model.
Once installed, a ghost immobiliser can stop an unauthorised engine from starting by requiring the driver to input a unique PIN code sequence using buttons on the steering wheel or on the centre console. The code can be changed at any time by the owner, either manually or remotely via an app for mobile devices. The device is also quiet and is undetectable by thieves as it does not emit any radio frequency.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and then blocks the engine if a false one is identified. The system is weatherproof and tamper-proof. It doesn't have any LED indicators or keys to draw thieves' attention.
It can be positioned behind the dashboard or in a discreet area, so that it is not visible to thieves and doesn't interfere with the vehicle's performance. It could even be placed in a small container and makes it less likely to be spotted during a test drive by unscrupulous salespeople selling cars.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system can be an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. Combining the system with other security measures will create an effective barrier to frustrate even the most persistent of thieves. This is the reason why more insurance companies are recommending or even requiring ghost immobilisers be fitted, as it will significantly lower the cost of insurance.
Making the Connections
In contrast to traditional security systems that can be heard by thieves, ghost immobilisers are silent and keep them from being aware that your vehicle has been turned on. They also block high-tech methods used to steal vehicles such as OBD port hacking. Installing them without leaving permanent marks on your car is an ideal alternative for those planning to sell the vehicle in the near-future.
The Autowatch Ghost 2 is a CANbus immobiliser that is among the most reliable and modern solutions to protect your car from theft. It makes use of the CAN data network to shut down your engine and generates a PIN code that only you know, which means it's hard for thieves to detect. It can be installed in many vehicles and works with many existing features, including car alarms GPS trackers, car alarms and steering wheel locks and door bypass systems for locks.
If you choose to use a Ghost immobiliser for your vehicle, be sure to consult the wiring diagram to determine the wires that connect. Make sure to double-check the location of these wires to ensure accuracy, and mark them with labels or tape to aid in keeping the track of them. You'll also need to locate a constant power source (12V) for the system as well as the grounding. Once you have all the components, you can begin connecting them to complete the installation.
The ghost immobiliser won't allow your vehicle to start until a pin code is entered via the buttons on the dashboard or steering wheel. This will stop ECU cloning and other methods of vehicle theft. It can also be paired with other Thatcham approved security devices like alarms or tyre clips to give your vehicle an additional security level.
As the UK automotive aftermarket market grows, so do the options for securing your vehicle. There are so many ways for thieves to gain access into your vehicle and steal it, so it's important to take every precaution to ensure that it isn't stolen. Ghost immobilisers are a popular option among car owners who are responsible.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using an CAN network. This stops the engine from starting until the PIN code is entered. This makes it extremely difficult for thieves to copy the key fob that you use to start your vehicle, and harder to disable the system through hacking its electronics.
Ghost Immobilisers are also able to be used in conjunction with GPS tracking devices that will assist you in tracking your vehicle's location and identify it in the event of theft. This feature isn't typically available in aftermarket security products however it is a great option to increase your vehicle's security and provide you with peace of peace of.
In addition to providing enhanced security and security, the Ghost-II immobiliser provides a simple user experience by eliminating the requirement for additional key fobs and devices. It features an easy and simple PIN code entry system that integrates seamlessly into your everyday routine. Additionally, it provides modes of deactivation and other features that allow you to temporarily disable the immobiliser valet parking or servicing.
Get the tools you require and become familiar with the wiring of your vehicle. A basic set of hand tools will allow you the flexibility to make precise connections, while a multimeter will help determine electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits, while cable tie can be used to secure the wiring in the correct position. It is also essential to work in an area that is well-lit, and wear safety gear when using electrical equipment and components.
You should test the Ghost immobiliser after having completed the installation to verify that it is working properly. The first step is to start the vehicle without entering the PIN code. If this fails then you'll have to retest and inspect the connections more carefully.
Ghost 2 immobiliser to other security devices unlike other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than traditional physical deterrents like wheel clamps or steering locks. It is TASSA recognized and approved by a few insurance companies, which makes it a cost-effective investment that can give you the peace of mind that you need.